Deep acne scars, scars, stretch marks, and even bothersome skin tags can significantly undermine confidence in everyday life. Many people try to address them with expensive skincare products, only to find that the results fall short of expectations. These structural skin concerns cannot be restored through surface-level skincare alone; they require medical technology that stimulates new skin cell production from within. Scanxel Laser, also known as ScanX 4D, is a laser technology recognized in dermatology for treating these concerns precisely and effectively.
What Is Scanxel Laser or ScanX 4D?
Scanxel Laser, with a treatment program developed under the name ScanX 4D, is an innovative carbon dioxide laser (Fractional CO2 Laser) with a wavelength of 10,600 nanometers, which is absorbed particularly well by water in skin cells. This technology delivers microscopic columns of energy deep into the dermis to stimulate skin repair and new skin cell formation.
What sets ScanX 4D apart is its intelligent scanning system, which provides highly precise control over the direction, depth, and pattern of energy delivery. This allows physicians to tailor treatment to each person’s skin condition and specific concerns. The device and its technology are certified to international standards by both the US Food and Drug Administration (US FDA) and the Thai Food and Drug Administration (Thai FDA), providing confidence in its safety and internationally standardized performance.
What Can Scanxel or ScanX 4D Laser Help Treat?
By both removing excess tissue and stimulating new collagen production, Scanxel or ScanX 4D Laser can be applied to a wide range of skin concerns, including the following:
1. Acne Scars and Other Scars
Treating acne scars is one of this device’s key applications. It creates numerous micron-sized treatment channels known as Microscopic Treatment Zones (MTZs), which extend into the dermis. Heat from the laser breaks down the fibrotic bands that tether acne scars while stimulating fibroblasts to accelerate the production of new collagen and elastin, helping acne scars become shallower and the skin appear naturally smoother.
2. Dark Spots and Skin Growths
For skin tags, moles, warts, or seborrheic keratoses, the laser uses vaporization, in which water within the cells is evaporated. Light energy is rapidly converted into heat, immediately destroying and removing the excess tissue with very high precision. This avoids injury to the surrounding skin and reduces the likelihood of post-treatment scarring.
3. Stretch Marks
Stretch marks result when the skin expands rapidly, causing disruption to its collagen structure. ScanX 4D delivers energy to remodel the skin in the affected area by removing damaged cells from the upper layer and stimulating the deeper structure to produce thicker, stronger collagen fibers. The color of the stretch marks gradually blends with the surrounding skin tone, while the skin texture becomes smoother.
4. Tightening Enlarged Pores
Thermal energy delivered into the skin causes existing collagen fibers to contract immediately through Collagen Contraction. As a result, previously enlarged pores appear smaller and tighter. Over time, Neocollagenesis, or new collagen formation, also helps improve the elasticity of the pore walls, making the complexion look smoother, more refined, and more light-reflective.
5. Firming Skin That Appears Lax
Although it is not specifically a skin-lifting device like radiofrequency or ultrasound systems, the Bulk Heating energy from ScanX 4D can penetrate deeply enough to stimulate tightening within the dermal structure. This helps soften fine lines and makes lax-looking skin appear firmer, plumper, and more youthful.
Operating Modes of the Scanxel or ScanX 4D Laser
A key advantage of Scanxel Laser is that it combines two treatment technologies in one device. Physicians can select or combine its operating modes to achieve the best results for each specific concern.
1. Fractional CO2 Laser Technology
- Full Name and Abbreviation: Fractional Carbon Dioxide Laser (Fractional CO2)
- How It Works and Key Features: This mode passes laser light through a grid to create numerous tiny points of energy, known as a fractionated beam, on the skin. Areas of untreated, healthy skin remain between the laser treatment points.
- Comparison: Compared with older resurfacing lasers that remove the entire skin surface, Fractional mode reduces downtime by more than 70%, lowers the risk of infection, and significantly reduces the likelihood of post-inflammatory hyperpigmentation (PIH). It is suitable for rejuvenating larger areas, including the treatment of acne scars and enlarged pores.
2. Conventional CO2 Laser Technology
- Full Name and Abbreviation: Conventional Continuous Wave CO2 Laser (Surgical CO2)
- How It Works and Key Features: This mode delivers a continuous linear laser beam or a pulsed beam to cut or destroy precisely targeted tissue.
- Comparison: Compared with traditional scalpel surgery, the Conventional CO2 Laser offers much greater precision. The laser’s thermal coagulation simultaneously helps control bleeding, resulting in a neat wound without bleeding and a faster recovery. It is suitable for removing moles, skin tags, and milia.
What to Know Before SCANXEL Laser or ScanX 4D Treatment
Understanding the post-laser process is essential for achieving the best possible results and preventing potential side effects.
1. Downtime
Planning for downtime is an important part of this type of laser treatment. After Fractional mode treatment, such as treatment for acne scars or enlarged pores, the skin will be red and feel warm, gradually improving within 24 hours. Small brown scabs will then form across the treated area and naturally fall away within 3–7 days. Do not pick or scratch them. When Conventional mode is used to remove skin tags, shallow depressions may form and take approximately 1–2 weeks to heal.
2. Wound or Facial Skin Care
Post-treatment skin care accounts for more than 50% of the result. Avoid getting the area wet during the first 24 hours. After that, the face may be washed with plain water or a gentle cleanser. Apply moisturizer regularly to keep the skin hydrated. Most importantly, avoid intense sunlight and regularly apply sunscreen rated SPF 50 PA+++ or higher to help prevent post-inflammatory hyperpigmentation (PIH) after laser treatment.
3. Results
It is important to understand that new collagen does not form overnight. Results from ScanX 4D develop gradually, with visibly smoother skin beginning around weeks 3–4. Collagen production continues for another 3–6 months.
Scanxel Laser or ScanX 4D Laser Treatment Procedure at The Vanish Clinic
The procedure is highly safe and does not take long. The standard steps are as follows:
- Skin cleansing: Makeup and impurities are thoroughly removed from the face.
- Topical anesthetic: An anesthetic cream is applied to the treatment area and left on for approximately 45–60 minutes to maximize comfort during the procedure.
- Treatment: An experienced physician adjusts the ScanX 4D energy settings to suit the lesion and begins the laser treatment. The procedure takes approximately 15–30 minutes, depending on the area treated. Watch an example of the procedure in this video: Review of a Scanxel Laser Program for Raised-Scar Removal
- Cooling and aftercare: After treatment, a cold compress is applied to lower the skin temperature, followed by skincare cream or medication to reduce irritation as directed by the physician.
Who Is Scanxel Laser or ScanX 4D Laser Suitable For?
- People with any type of deep acne scar, including ice pick, boxcar, and rolling scars
- People with enlarged pores, uneven facial texture, or makeup that does not apply smoothly
- People who want to remove moles, beauty marks, skin tags, warts, or milia
- People with stretch marks on various areas of the body
- People with fine lines who want firmer, more youthful-looking facial skin
- People seeking rapid skin rejuvenation who can allow approximately 3–7 days for recovery
What Results Can Scanxel Laser or ScanX 4D Laser Provide, and How Long Do They Last?
Improvements from Scanxel or ScanX 4D can begin to appear after the first session. In general, acne scars become approximately 20–30% shallower per treatment. For the clearest results on deep acne scars, approximately 3–5 sessions may be required, spaced 4–6 weeks apart according to the physician’s assessment.
In terms of longevity, results from acne-scar and scar treatment are considered permanent because newly formed tissue and collagen have filled the skin’s structure. Results for pore tightening and wrinkle reduction last 1–2 years, depending on each person’s skincare routine, lifestyle, and sun protection.
Conclusion: Address a Range of Skin Concerns with Scanxel or ScanX 4D Laser at The Vanish Clinic
Scanxel Laser or ScanX 4D is an advanced laser innovation designed to renew the skin effectively, addressing concerns such as difficult-to-treat acne scars, enlarged pores, and bothersome skin tags. However, a powerful device requires an experienced physician who can assess the skin and set the energy level precisely.
At The Vanish Clinic, ScanX 4D treatments are provided under the care of experienced specialist physicians. Each skin concern is assessed case by case to create a targeted treatment plan designed to deliver the best possible results and safety for the individual. If you are looking for smoother facial skin, fewer visible acne marks, and renewed confidence, contact The Vanish Clinic today for a consultation and skin assessment.
- LINE: The Vanish Clinic
- Facebook: The Vanish Clinic
- Call: 091-426-3624
- View Our Locations: The Vanish Clinic Locations
- Email: thevanishth@gmail.com
